Configure Your Project with the EZ Stack Configurator

Tab Description

General Select your target processor, software tools and the built-in applications to be included in your project.

TELNET Set the number of application sockets, the server account name and password, select the built-in commands and add your custom commands.

TFTP Set the number of application sockets and the TFTP block size

HTTP Set the root directory for your html files, select the HTML files, select the CGI functions and add your custom CGI functions.

TCP Select the built-in applications and add your custom TCP ports.

UDP Select the built-in applications and add your custom UDP ports.

Shell Console Select the built-in commands and add your custom commands.

PEMAC Specify the parameters for the EMAC, your IP, subnet and gateway IP addresses and the ethernet MAC 48 bit physical address.

eZ80F91 Hardware Specify the Chip Select registers, the GPIO registers, configure the Uarts, specify the system clock frequency, select the EZ Stack timer and specify the interrupt table entries.

Output The status of the Configurator operations is placed here. Status messages are blue, warning messages are yellow, error messages are red and informational messages are black and white.